RIPP 2011 - 2014 DODGE CHARGER 3.6 SUPERCHARGER KIT

Save $44.00
RIPPSKU: 1114chrg36

Price:
Sale price$5,956.00 USD Regular price$6,000.00 USD

Description

* Due to the overwhelming amount of orders please allow 7 weeks for assembly once your order is placed *
  • Please note: These systems require professional installation with mechanical knowledge and support.
  • Tune included but vehicles should be DYNO Tested and tuned by a professional. 11-12psi of boost, gaining 170+HP!

      2011 - 2014 Dodge Charger 3.6 V6 - RIPP Supercharger System.  After all said and done, a projected 400 - 450 WHEEL horsepower to the ground!

      Key features of this system are: a Vortech V3 Self-Contained Centrifugal Supercharger, an air-to-air front mounted intercooler, larger plug and play primary injectors and a proprietary plug-&-play map sensor. Proper ECU calibrations are provided by RIPP via HP Tuners. Our system bolts on in eight - ten hours by a licensed mechanic and is considered the most complete and easy to install system on the market.

      Preliminary tests show that an Automatic 3.6 Pentastar Dodge Charger/ Challenger produces only 255** rear wheel HP (WHP) in stock form. With a RIPP Supercharger installed we safely squeezed 425WHP+ and 360ft/lbs** of Torque on a factory 3.6 Pentastar. That WHP is higher than a 5.7 V8 Engine swap costing thousands more and more in line with a 6.4 Hemi. Additionally clients have reported an MPG increase from 1-4mpg combined City/hwy***. 

      RIPP has spent an enormous amount of time testing for better drive quality.  We've been testing in all conditions including high altitude, hot dry deserts and cold wet climates. No other manufacturer has spent more time developing a bolt-on supercharger than RIPP and it is a brand people can rely on World Wide. 

      This kit will contain all necessary hardware, including tuning

      Complete System:

      • Vortech V3 Si Trim Supercharger (Self Contained)
      • Vortech Race Blow Off Valve
      • Plug and Play Injectors (New)
      • Front Mounted Intercooler & mounting brackets 
      • Aluminum mandrel bent charge piping 
      • Engine Management; HP Tuners, link cable and tune
      • Powder Coated Mounting Brackets
      • Gates Belt
      • RIPP Air Filter
      • Hardware
      • 4 Ply Black Boost Couplers
      • Vacuum lines, Vacuum T's and all adapters required
      • Fully Illustrated Color Instructions
      • 1 Year Warranty
      • Tech line with Customer Service

      2011 - 2014 Dodge Chargers are 50 state legal!

       

       100% Compatible with AWD Vehicles 

        ** All RIPP WHP levels are measured at the rear wheel, not at the crank. Be careful when comparing HP to WHP. WHP levels vary depending on tire and gear combination as rotational mass comes into play, this affects both Naturally Aspirated (NA) and Forced Induction (FI) total output.

       ***Although the tune included with this system is calibrated for your vehicle the user is responsible for any further Dyno tuning to refine the calibration to their likingThe tune should be considered standard. The user should look forward to proper Dyno tuning if necessary. 

      RIPP is not responsible for tuning or discrepancies between different dyno readings. Many Dynometers read in different net output depending on manufacture, style, elevation, and temperature. RIPP advertises SAE HP captured at the wheel instead of at the crank for the most realistic scenario as possible.  0-60 times and quarter mile times may vary based on driving style and other variable out of our control.

       

      THIS IS A “RACE ONLY” PRODUCT USED SOLELY FOR COMPETITION. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. 797 Performance will require a liability release to be signed prior to processing an order with this item

      Check out these other products:

      Recently viewed